Virtual Radar

Since both the hackspace, and my home are fairly close to the approach to Leeds/Bradford airport, and I’ve always had an interest in aircraft I’ve often wondered what was flying around, so decided that building my own virtual radar system would be an interesting project.

Having previously experimented with using a USB tv tuner as a software defined radio I settled on a Beaglebone Black and E4000 tuner (very inexpensive, available on ebay). The required software is rtl-sdr (a library for using the tv tuner as a software defined radio) and dump1090 (which uses rtl-sdr to decode the aircraft broadcasts).

Standard Dump1090 output.

A quiet tuesday evening with little air traffic.

Having installed debian on a spare micro SD card and compiled the software a quick test with the aerial included with the tv tuner proved that the whole setup worked and was happily picking up aircraft approaching the airport, the next step was a better aerial. I opted for a colinear aerial, which can be constructed from nothing more than a length of coaxial cable and some tape to hold it together. Construction details can be found here. The finished aerial was sealed into a length of 21.5mm overflow pipe to avoid water getting into the coax and affecting reception.

Performance with the new aerial is much improved, and gives a range of approximately 100 miles with the aerial simply placed on a roof. Range is approximately halved if the aerial is mounted internally. Hopefully a range improvement can be gained when the aerial is properly mounted above the roofline.

Scatter plot of aircraft positions.

Scatter plot of aircraft positions.

Using an improved version of the dump1090 software with integrated mysql logging gives a number of additional possibilities, a scatter plot of the logged tracks nicely shows the routes in use. Adding extra tables to the database schema to hold aircraft information can allow you to search flights on aircraft type and owner/operator, revealing interesting patterns in the users of UK airspace.

Aircraft data mapped to icao24 identifiers.

Aircraft data mapped to icao24 identifiers.

Future improvements include better aerial positioning, the possible addition of extra receiver nodes, and a high gain directional yagi aerial allowing longer range reception in any direction of interest (based on a design from this yagi calculator – details will be provided in a future blog post).

This entry was posted in Projects, Radio. Bookmark the permalink.

2 Responses to Virtual Radar

  1. Michael says:

    Hi, I’m looking for a usable dum1090 with MySQL support for use on my raspberry. Do you have anything that I can use, source or compiled?

    Thanks,
    Michael
    New Zealand

Leave a Reply to Michael Cancel reply

Your email address will not be published. Required fields are marked *